A Concord watch is a status symbol. When your watch suddenly stops working, it can feel frustrating. Don’t worry, though—most issues can be fixed without professional help. There may be a battery issue. Or there may be a mechanical glitch. You need to give a little time and have a bit of patience. You can often identify and solve the problem yourself.

But at times you may not know what to do for Concord Watch Repair. In such cases, you have to approach experts. Trying to fix such issues on your own may cause some major issues. Even for minor problems, you have to be careful and follow some steps.

In this guide, we are going to discuss these simple troubleshooting steps that you can follow to get your watch working again. These tips are easy to follow.

Step 1: Check the Battery of your Valuable Concord Watch

The most common reason it stops working is a dead battery. Here’s how you can check whether there is a battery issue:

Look for Signs of a Dead Battery:

If your watch has stopped functioning completely, there is a high possibility that its battery is drained. If it’s a quartz watch, this is more likely.

Replace the Battery:

  • Open the back of the watch. Do it carefully by using a watch case opener. You can also use a small screwdriver to open it.
  • Take out the old battery and replace it with a new one. Make sure that you can use the same type.
  • Check if the new battery is placed properly. Only after that close the case.

Visit a Professional:

If you’re unsure about opening the watch yourself, take it to an expert. They can help with a quick battery replacement.

Step 2: Check the Crown and Time Settings of The Watch

Sometimes, the watch stops working because the crown isn’t in the right position.

Inspect the Crown:

  • Make sure the crown is pushed in.
  • If it’s pulled out even slightly, the watch may stop running.

Reset the Time:

  • Pull the crown out to the time-setting position.
  • Turn it in to set the correct time and date.
  • Push the crown back in firmly.

Step 3: Clean the Watch

Dirt can cause a mechanical watch to stop working. Cleaning your watch can help solve this issue.

Use a Soft Cloth:

Wipe the exterior of the watch with a clean and smooth cloth. This will help to remove dirt and dust. Also, remove the smudges.

Check the Movement:

If it’s a mechanical watch, there is a chance that dust can block the gears. In this case, you may need a professional cleaning. This is because in such cases wiping doesn’t help.

Avoid Water Damage:

If your watch isn’t water-resistant, be careful to keep moisture away during cleaning.

Step 4: Wind the Watch (For Mechanical Watches)

Mechanical watches need regular winding to keep them running. If yours has stopped, it might simply need to be wound.

Turn the Crown:

  • Rotate the crown in a clockwise direction to wind the watch.
  • Stop when you feel resistance. This is to avoid overwinding.

Wear the Watch Regularly:

Automatic mechanical watches wind themselves as you move. If you don’t wear it often, wind it manually.

Step 5: Check for Physical Damage

There can be physical damage. For example, there may be a cracked case. Or there may be problems like bent hands. All this can cause your watch to stop.

Inspect the Watch Closely:

A thorough inspection of your watch is necessary. It helps in looking for any visible signs of damage. Check if the hands are stuck or bent. They might be preventing the watch from working.

Handle With Care:

If you notice damage, avoid forcing the watch to run. This is the time you need to contact a professional. Take it to a genuine Concord watch repair expert to avoid further harm.

Step 6: Magnetization Issues

Watches can stop working if they become magnetized. This happens when they are exposed to strong magnetic fields.

Test for Magnetization:

Use a compass to check if your watch affects the needle. If it does, your watch might be magnetized.

Demagnetize the Watch:

To prevent this issue, take your watch to a watchmaker who has a demagnetizing tool. They can fix it quickly and efficiently.

Step 7: Consider Professional Help for Concord Watch Repair

If none of the above steps work, it’s time to consult an expert or an authorized Concord watch service center.

Find a Trusted Repair Shop

Look for a watch repair professional who specializes in repairing luxury watches like Concord.

Ask About Costs

Get an estimate before proceeding with repairs. It is necessary as some fixes might be covered under warranty if your watch is relatively new.

Request a Full Service

A full service includes cleaning the watch. They will also do lubrication. The expert will also check all the parts of the watch to ensure it runs smoothly.

Follow these tips, and your watch will start working in no time. Taking these steps ensures your watch stays in excellent condition.

Conclusion

A stopped Concord watch doesn’t have to be a cause for panic. With the right approach, you can troubleshoot and resolve most issues at home. Start by checking the battery. Also, check the crown of your timepiece. Make sure to check the time settings. In addition, regular maintenance is also important. Don’t forget to clean and wind the watch as needed.

If the problem persists, inspect for damage. Also, check for magnetization. For more complex issues, professional assistance is always available.

As for expert assistance for Concord Watch repair, get in touch with us at J&J Watch Repair Inc. We have a skilled team of technicians to repair all kinds of valuable watches. So, connect with us now to fix any issue with your watch.